Индустриалните принтери за баркод етикети от серията TSC MH241/MH261 поддържат термотрансферен и директен термопечат за етикетиране в производството, складовете, логистиката, палетирането и фармацията. Изберете 4-инчовия диапазон MH241 за стандартни формати и печат на фини детайли или 6-инчовия диапазон MH261 за по-широки етикети, с резолюция, свързаност и работа с носители, съобразени с вашето приложение.
The MH241/MH261 range combines a die-cast print mechanism, large media capacity and network connectivity for repeated label production. It builds on the MH240 generation, adding printhead diagnostics and remote management capabilities that help teams monitor printers across production areas and dispatch stations.
Typical applications include product identification, batch and serial-number labels, shipping labels, pallet identification and warehouse location labels. Pharmaceutical and healthcare uses require suitable label materials and adhesives, with print durability checked against storage, handling and cleaning conditions.
The 4-inch range reaches up to 356 mm/s at 203 dpi, while the 6-inch MH261T reaches up to 305 mm/s at the same resolution. Higher-resolution models trade maximum speed for finer detail, making resolution a practical choice based on barcode dimensions, text size and required output.
These figures are maximum print speeds, not labels-per-hour ratings. Actual throughput depends on label length, artwork, media and ribbon selection, data processing and any cutting or peeling operation. Test a representative label at the intended settings before specifying production capacity.
TSC Sense Care includes TPH Care, a diagnostic mechanism that monitors the thermal printhead and reports its condition. Operators can use this information to investigate deteriorating print quality and plan maintenance. Printhead monitoring does not replace checking the readability and quality of the finished barcode.
The 4-inch T and P models also include a media near-end sensor, which warns when the label roll is running low. Adjustable printhead pressure and ribbon settings help address uneven printing and ribbon wrinkles; the printhead and platen roller can be replaced without specialised tools.
TSC Console supports printer configuration, status checks and firmware management. SOTI Connect provides additional fleet-management capabilities and requires a separate licence; network management uses Ethernet or the optional Wi-Fi connection.
For several print stations, define the required alerts, network access and configuration controls before deployment. This makes it easier to distinguish a media-loading issue from a printer fault or a problem with the software sending the label.
Start with the width of the printed artwork and the total media width, including the backing liner. The 4-inch range accepts media up to 114 mm wide but prints across a maximum of 104 mm. The 6-inch range accepts media up to 172.7 mm wide and prints across a maximum of 168 mm.
| Спецификация | MH241 series: 4-inch | MH261 series: 6-inch |
|---|---|---|
| Resolution and models | MH241: 203 dpi; MH341: 300 dpi; MH641: 600 dpi. Each is available in standard, T and P versions. | MH261T: 203 dpi; MH361T: 300 dpi |
| Максимална скорост на печат | 203 dpi: 356 mm/s; 300 dpi: 305 mm/s; 600 dpi: 152 mm/s | 203 dpi: 305 mm/s; 300 dpi: 254 mm/s |
| Максимална ширина на печат | 104 мм | 168 mm |
| Ширина на медията | 20–114 mm | 50.8–172.7 mm |
| Дебелина на медията | 0.06–0.28 mm | 0.06–0.268 mm |
| Ribbon capacity | Up to 600 m; ribbon width 25.4–114.3 mm | Up to 450 m; ribbon width 50.8–178 mm |
| Дисплей | Standard: 3.5-inch colour LCD; T and P: 4.3-inch colour touchscreen | 4.3-inch colour touchscreen |
| Dimensions, W × H × D | Standard and T: 276 × 326 × 502 mm; P: 276 × 412 × 502 mm | 357 × 313 × 514 mm |
| Power and operating environment | 100–240 V AC, 50–60 Hz; 0–40°C; 25–85% relative humidity, non-condensing | 100–240 V AC, 50–60 Hz; 0–40°C; 25–85% relative humidity, non-condensing |
Choose the 4-inch range when your artwork fits within 104 mm, narrower media is required, or small text and dense codes justify 600 dpi. Resolution means dots per inch: more dots allow finer detail, but the label design and print settings still determine the result. The MH261 range does not offer 600 dpi.
Choose the 6-inch range when the printed layout exceeds 104 mm, such as a wider pallet or logistics label. At equivalent resolutions, the 4-inch models have higher maximum speeds, so extra width should be a requirement rather than an assumed performance upgrade.
Примерна конфигурация: a shipping label loaded 100 mm across the printhead fits within the 4-inch print width. A pallet label requiring artwork 150 mm across needs the 6-inch range. Check the liner width, barcode size and required margins before selecting either configuration.
The standard 4-inch models suit stations operated through physical buttons. T versions add a touchscreen and media near-end detection. P versions also include an internal rewinder for rolls up to 8 inches in outside diameter, making them relevant when printed labels need to be collected on a roll.
Optional 5-inch internal rewinding kits are listed for standard and T versions and for the 6-inch models. Specify the complete model suffix when requesting accessories: cutters, peel-off kits and rewinders are not interchangeable across every configuration.
Both ranges support continuous, die-cut, fan-fold and notched media. For black-mark sensing, the 4-inch models support marks on either the top or underside; the 6-inch models specify underside marks. Check the mark position and sensor alignment when reusing existing label stock.
Thermal transfer uses a ribbon and is appropriate when labels need resistance to handling or longer storage. Durability depends on the matched ribbon, label material and exposure conditions. Direct thermal uses heat-sensitive media without a ribbon and suits shorter-life applications where heat and light exposure are controlled.
Optional finishing equipment includes peel-off kits and cutters, with care-label cutters listed for suitable 4-inch configurations. The published 12.7 mm minimum peel-off label length applies to the MH241 series with the appropriate setup; it is not a general limit for every model or finishing mode.
Standard connections across the range include USB 2.0, 10/100 Mbps Ethernet, RS-232 and two front USB host ports for supported peripherals. The 6-inch models also list a standard parallel interface.
GPIO, meaning general-purpose input/output for exchanging control signals with equipment such as applicators, is optional. The 4-inch range offers a factory GPIO and parallel-interface option; GPIO is a dealer option on the 6-inch models. Applicator integration requires checking the signals, timing and mechanical arrangement.
An optional 802.11a/b/g/n/ac Wi-Fi and Bluetooth 4.2 combination module is listed for both ranges. Separate internal Bluetooth 5.0 MFi is a factory option on the 4-inch models. Wireless-option availability varies by region and should be confirmed for the quoted configuration.
Supported barcode formats include Code 128, GS1 DataBar, EAN/UPC, QR Code, Data Matrix, PDF417 and Aztec. These printers produce barcode labels; the required dimensions, data structure and print-quality criteria must be defined in the label template.
Printing from an ERP or warehouse management system requires a compatible driver or printer-command output, a working connection and correctly configured templates. Select the софтуер за дизайн на етикети around your data sources, operator workflow and automation requirements, with its licence and printer support checked separately.
The TSPL-EZD printer language supports EPL, ZPL, ZPL II and DPL emulations. This can simplify migration, but existing templates should be tested for fonts, barcode dimensions, graphics and command behaviour. When replacing an MH240 or TTP-series printer, provide the exact previous model, resolution and a sample print job.
TSC lists a PDF Print Dongle as an optional accessory for these models. Direct PDF printing should therefore be specified in the configuration rather than assumed to be included. Test representative PDFs for page size, scaling and barcode output.
MarvelTech supplies TSC/Printronix equipment and provides equipment adjustment, periodic maintenance and support for industrial identification systems. Discuss the printer, consumables, software connection and servicing requirements together so the proposed configuration covers the complete printing workflow.
The quote depends on print width, resolution, model version, interfaces, finishing accessories, software licences and any agreed installation or support work. Request confirmation of availability, delivery time, warranty terms and service coverage for your location.
Request an MH241/MH261 quote from MarvelTech. Send a sample label or artwork, label and liner dimensions, daily volume and peak output requirement, material and ribbon details, barcode types, software and operating system, required connections, finishing method, printer quantity and installation location. Include the smallest text or barcode size if you need help choosing the resolution.
Choose the MH241 range when the printed layout fits within 104 mm; choose the MH261 range when it requires up to 168 mm across the printhead. Maximum media widths, including the backing liner, are 114 mm and 172.7 mm respectively. Both suit industrial identification and logistics labels. Select by artwork orientation and liner dimensions, since a pallet label does not automatically require a wider printer.
The 4-inch MH241, MH341 and MH641 models provide 203, 300 and 600 dpi respectively, including their T and P versions. The 6-inch MH261T provides 203 dpi and the MH361T provides 300 dpi. Higher resolution, measured in dots per inch, supports finer detail. Choose using the smallest text and barcode elements in your actual artwork; QR Code or Data Matrix printing alone does not establish a need for 600 dpi.
The standard MH241 has a 3.5-inch colour display with button controls. MH241T adds a 4.3-inch touchscreen and a sensor that warns when media is running low. MH241P includes those features plus an internal rewinder for rolls up to 8 inches in outside diameter. Choose P when collecting printed labels onto a roll is part of the workflow; it has a taller cabinet but the same maximum print speed at equivalent resolution.
Both ranges support either method. Direct thermal uses heat-sensitive labels without a ribbon and suits shorter-life applications with controlled heat and light exposure. Thermal transfer uses a ribbon and offers more material choices for longer-lasting identification. For labels exposed to abrasion, cleaning chemicals or outdoor conditions, specify the label material, ribbon and adhesive together, then assess samples under the intended exposure conditions.
Existing consumables can be reused if their dimensions, winding and sensing features match the selected model. Check roll diameter, core size, liner width and media thickness. The 4-inch range supports black marks on either side of the media; the 6-inch range specifies underside marks. Ribbon capacity also differs: up to 600 m for the MH241 range and 450 m for the MH261 range, subject to the specified ribbon dimensions.
Assess completed labels per minute using a representative print job and the required finishing mode. At 203 dpi, the MH241 range reaches a maximum of 356 mm/s and the MH261T reaches 305 mm/s. Those figures describe print speed; label length, data processing, cutting, peeling and consumable changes affect sustained output. Include peak demand and acceptable replenishment time when specifying capacity.
Ethernet, USB and RS-232 are standard across both ranges. Wi-Fi and Bluetooth require optional hardware: both ranges list an 802.11a/b/g/n/ac Wi-Fi and Bluetooth 4.2 combination module, while the 4-inch range also lists a factory-fitted Bluetooth 5.0 MFi option. Specify the connecting device, operating system and network authentication requirements, and confirm regional availability of the required wireless configuration.
They can integrate where the system supplies a compatible driver or printer-command output. TSPL-EZD supports EPL, ZPL, ZPL II and DPL emulations, but existing templates need testing for fonts, graphics, barcode dimensions and command behaviour. Choose софтуер за дизайн и печат на етикети around your data sources and automation requirements, with licensing checked separately. Direct PDF printing requires the optional PDF Print Dongle.
Cutting and peeling require the appropriate model-specific accessories. Specify whether operators need separate labels, labels presented with the backing removed, or printed rolls for later use. For automatic application, optional GPIO provides control signals to external equipment; the applicator, mounting and timing still require integration. Provide label material, dimensions and required cycle time so accessory compatibility and operating limits can be checked for the exact model suffix.
TSC Console supports remote configuration and status monitoring; SOTI Connect provides additional management capabilities under a separate licence. TPH Care, part of TSC Sense Care, monitors printhead condition. These functions do not grade finished barcodes or establish that label data is correct. If checking barcodes during printing is required, compare selected Printronix T8000 configurations with optional barcode verification.
TSC specifies operation at 0–40°C and 25–85% relative humidity, non-condensing, so sub-zero printing falls outside the stated operating range. Washdown exposure requires a separate installation assessment. Distinguish the printer’s environment from the conditions the finished label must withstand. Allow clearance for media loading, cleaning and accessories, and confirm that the label adhesive suits the surface temperature when applied.
Use the order enquiry form and provide sample artwork, label and liner dimensions, smallest text or barcode size, daily volume and peak output. Include existing consumable details, software, operating system, connections, finishing requirements, printer quantity and installation location. Identify any installation or support work required, and request confirmation of the exact model, accessories, software licences, availability, delivery time and applicable warranty terms.
Гамата настолни баркод принтери TSC TH DH Series предлага 2-инчови и 4-инчови модели за идентификация на продукти, етикети за пратки, етикетиране в търговията на дребно и гривни за здравеопазване. Изберете TH за термотрансферен и директен термопечат или DH за приложения с директен термопечат, с модели с разделителна способност 203 dpi и 300 dpi, както и с възможности за свързаност и работа с медия, специфични за конфигурацията.
Виж ДетайлиИндустриалният принтер за етикети Printronix Auto ID T8000 произвежда баркод, продуктови, корабни и съответстващи етикети за производство, складиране и дистрибуция. Неговите 4-инчови, 6-инчови и 8-инчови конфигурации съчетават метална конструкция, директен термопечат и термотрансферен печат, отдалечено управление и опционална проверка на баркодове при избрани модели.
Виж ДетайлиНастолният 4-инчов термичен принтер Printronix T800 е предназначен за отпечатване на баркодове на места за експедиция, задни офиси в търговията на дребно, производствени работни места и здравни заведения. Той поддържа директен термопечат и термотрансферен печат, побира 300-метрови ленти и предлага опционално фабрично вградено UHF RFID кодиране за идентификация на продукти и активи.
Виж ДетайлиМоля, свържете се с нас, ако имате въпроси или коментари.
